Looks like another jailbreaking USB device just received its very own PS3 downgrader. By this point, we have lost count of how many of these USB devices have received a downgrader.
How-to downgrade using ecliPS3:"We are proud to release the Eclipse downgrader for PS3. This firmware will allow you simply to flash the eclipse to downgrade your PS3 from V3.50 to lower firmwares. You will need to use the Eclipse firmware V1.3 to reflash the Eclips3 with a working Firmware. Just follow the instrutions written into the .txt file inside the firmware zip file."- Eclipse
1) Flash your Eclipse as you normally would (as shown here). Note: After you have completed the downgrading procedure as described below you must reflash your Eclipse with the standard firmware.
2) Prepare a blank USB memory stick with only 2 files inside: Lv2Diag.self (file 1) and the modified 3.41 PUP file. These must be in the root of the memory stick. No other file must be present.
3) Insert the Eclips3 with the downgrade firmware in your console.
4) Turn on the PS3 using the standard sequence; Remove power (or power plug) from the PS3,insert Eclips3 into USB port, power on, then quickly press eject. After a very short while the PS3 will power off.
5) Turn on the PS3 to confirm that it is in Service Mode. You should see a red box on the screen saying Factory Service Mode. (If you are using a component cable the image might be garbled). Turn off the PS3 and remove Eclips3.
6) Insert the USB memory stick with the 2 files on in the "right USB port" of the PS3 and turn it on.
The screen will be black, but the LED on the PS3 will blink.
7) Wait for approximately 3 minutes. In the end the PS3 power button will flash green and then the PS3 will turn off. Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
8) Remove the USB memory stick and turn on the PS3. It will still be in service mode. you can now verify that it has been downgraded to v3.41. If you wish to downgrade to an earlier firmware you can do so now, there is no need to use modified custom PUP when the firmware has already been downgraded to 3.41.
9) Insert USB drive in PC, delete the 2 files, and copy LV2Diag.self (file 2) to it.
10) Insert USB memory stick and power on the PS3. After approximately 10 seconds it will power off.
11) Remove the USB memory stick and power on the PS3. The procedure is now complete.
Direct Download (ecliPS3 updater file for Factory/Service Mode)
[Mirror]: DOWNLOAD HERE (ecliPS3 updater file for Factory/Service Mode)
[Mirror]: DOWNLOAD HERE (Downgrader files and modified v3.41 firmware)
Via Dukio
Source Eclipsemod
No comments:
Post a Comment